Home / Support center / Palworld
Support center

Palworld SUPPORT

AvailableMenuDiscord

Everything for Palworld: download, PC preparation, requirements and the fix for every error.

Your path to the first match

STEP 1Download the loader

Get the latest loader from the Downloads page with your key.

Go to download
STEP 2Prepare your PC

Turn off Windows protection, install the system packages and set the BIOS options.

Prepare the system
STEP 3Fix any problem

Menu not showing, loader closing, Hyper-V and VBS conflicts and every error code.

Open the fixes

Download and first run

  1. Get your key in your Discord purchase ticket.
  2. Open the Downloads page, paste your key and download the loader. Put it in its own folder.
  3. Before the first run, follow “Prepare your PC” below and restart the PC.
  4. Run the loader as administrator (right click › Run as administrator). It updates itself first, then opens again.
  5. Paste your key with a right click in the loader window and press Enter. If it asks to clear traces of earlier bans or to use the spoofer, answer Yes only if you need it.
  6. The loader closes by itself when it is done. Then start the game.
  7. The menu shows by itself. Open and close it with Home or Insert, and unload it with End. If it does not show, see “Error codes”.
  8. This product: the menu can take 1 to 2 minutes to show. Do not switch to another window until it does.

Prepare your PC

1. Install the system packages

Missing system files are the most common reason a loader does not start. Install both packages, then restart.

2. Turn off Windows Security and antivirus

  1. Open Settings › Privacy & security › Windows Security › Open Windows Security.
  2. Go to Virus & threat protection › Manage settings.
  3. Turn off Real-time protection and the other switches on that page.
  4. App & browser control › Reputation-based protection: turn off every switch (SmartScreen).
  5. Uninstall any other antivirus, and FACEIT Anti-Cheat or Riot Vanguard if you have them, then restart.

3. Turn Windows Defender off completely

Defender Control turns Windows Defender off with one button, and can turn it back on the same way.

  1. Download Defender Control with the button below and extract it with the password shown (WinRAR or 7-Zip; Windows 11 opens it directly).
  2. Run it and press “Disable Windows Defender”.
  3. Orange means real-time protection is off but Defender still runs in part. Red means it is fully off.
Password to extract the filesordum

4. Hyper-V: set it with one click

Important: Before you turn Hyper-V on or off, remove the Windows PIN and password. If one is set while Hyper-V changes, Windows can stop signing in and only a fresh install (format) fixes it.

The loader needs Hyper-V off with AMD processors and on with Intel processors. Our script does every step for you.

  1. Remove the Windows PIN and password first: Settings › Accounts › Sign-in options (full steps in error 04 of “Error codes”).
  2. Download the script for your processor below.
  3. Right click it › Run as administrator. If Windows shows “Windows protected your PC”, choose More info › Run anyway.
  4. Wait until it shows DONE. Turning Hyper-V on also repairs Windows files and can take 10 to 20 minutes.
  5. Restart the PC.

5. BIOS: turn off Secure Boot and turn on virtualization

Pick the brand of your motherboard (desktop) or your laptop to see the exact steps.

ASUSROG · TUF · PRIME
BIOS keyDel / F2
  1. Restart and press Del (or F2) repeatedly while the PC starts.
  2. Press F7 to switch to Advanced Mode.
  3. Secure Boot Boot › Secure Boot › OS Type › Other OS
  4. If Secure Boot still shows On Boot › Secure Boot › Key Management › Clear Secure Boot Keys
  5. Intel Advanced › CPU Configuration › Intel (VMX) Virtualization Technology › Enabled
  6. AMD Advanced › CPU Configuration › SVM Mode › Enabled
  7. Press F10, then OK, to save and restart.

Check in Windows: Task Manager › Performance › CPU shows “Virtualization: Enabled”, and System Information shows “Secure Boot State: Off”.

Menu names can differ a little between BIOS versions. Look for the same words.

6. Set up the Discord overlay

This product shows its menu through the Discord overlay.

  1. Download Discord from the official site and sign in (or create an account).
  2. User Settings › Game Overlay: turn on “Enable overlay” and turn off “Enable legacy overlay”.
  3. User Settings › Advanced: turn on Hardware Acceleration.
  4. Make sure the overlay is not turned off for this game in Registered Games.
  5. Keep Discord open while you play.

Turn off VBS (Hyper-V error even when Hyper-V is off)

The loader may say Hyper-V is on even after you turned it off in Windows features. The hidden reason is usually Virtualization-Based Security (VBS) running in the background.

Check whether VBS is running

  1. Search for System Information in Windows and open it.
  2. Scroll down to “Virtualization-based security”.
  3. Running means VBS is on and must be turned off. Not enabled means you are ready.

Recommended: Core Isolation

  1. Search for Core Isolation in Windows and open it.
  2. Turn off Memory integrity.
  3. Restart, then check System Information again.

Advanced: the registry

Careful: A wrong change in the registry can break Windows. Follow the path exactly.

  1. Press Win + R, type regedit and open it as administrator.
  2. Go to the path below, open EnableVirtualizationBasedSecurity, set it to 0, then restart.
Computer\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\DeviceGuard

If it is still running

  1. In regedit, set Enabled to 0 in both paths below.
  2. Restart. System Information should now show “Virtualization-based security: Not enabled”.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\WindowsHello

Error codes

01The game starts but the menu does not show

Check the overlay your product runs through (step 6 of “Prepare your PC”).

  1. Discord products: the overlay on, the legacy overlay off and Hardware Acceleration on. The menu can take 1 to 2 minutes; do not switch windows meanwhile.
  2. NVIDIA / AMD products: the NVIDIA App overlay, or the AMD Adrenalin overlay with the performance display, must be on.
  3. SteelSeries products: press your Sonar overlay key before you start the loader.
  4. If the game was just updated, wait for the product update (see Status).
02No menu in game, or the loader closes right away

Runtime libraries are missing. Install Visual C++ Redistributable (x64), restart, and try again.

03Error: Failed to load crt lib

System libraries are missing or the network is blocked. Try with a VPN on. If it continues, install the packages in “Prepare your PC”.

04Error: Please make sure PIN is not set in Windows sign-in options

Important: Remove the Windows PIN and password before you turn Hyper-V on or off. If one is set while Hyper-V changes, Windows can stop signing in and only a fresh install (format) fixes it.

  1. Settings › Accounts › Sign-in options: turn off “For improved security, only allow Windows Hello sign-in”.
  2. In the same page open PIN (Windows Hello) › Remove, and confirm.
  3. Password (local account): Password › Change, and leave the new password empty.
  4. Microsoft account: Settings › Accounts › Your info › Sign in with a local account instead, then remove the password as above.
  5. Turn off Hyper-V with the script in step 4 of “Prepare your PC”, then restart.
  6. If the script cannot remove the Hyper-V files, turn virtualization off in the BIOS, run the script, then turn virtualization back on.
05Error: Please disable Intel Rapid Storage Technology

Uninstall Intel RST from your PC following Microsoft’s instructions, then restart.

06The bind button does not work

Close the loader and inject again. If it still does not work, run the overlay program as administrator.

07Error: Unsupported firmware / 0x296

Close the loader and inject again. If it continues, see “Unsupported firmware (MBR / Legacy)” below.

08Error: Unknown network error

Your connection dropped or is unstable. Check your internet and try again, and turn off any VPN while the loader opens.

09Error: Failed to allocate memory / to map memory
  1. Less than 12 GB of RAM: the product cannot run on this PC. Open a support ticket.
  2. Turn off all startup programs (Task Manager › Startup apps) and restart the PC.
  3. Still failing: run Autoruns (Microsoft), turn off everything under CurrentVersion\Run, and restart.
10Error: Please uninstall Vanguard / Faceit first
  1. Control Panel › Programs and Features.
  2. Uninstall Riot Vanguard or Faceit Anti-Cheat.
  3. Restart the PC, then open the loader and the game again.
11Error: AES instruction set is not supported

Your processor is too old and has no AES instructions. This cannot be fixed with software; the loader needs a PC with a newer processor.

12Error: Please enable Intel VT-X in the BIOS / Please enable AMD-V in BIOS
  1. Restart and open the BIOS (Del or F2).
  2. Intel: enable “Intel Virtualization Technology” (Intel VT-x). AMD: enable “AMD-V” (SVM Mode).
  3. Press F10 to save, restart and try again. The exact path for your motherboard or laptop is in step 5 of “Prepare your PC”.
13Error: VMX / SVM is not supported
  1. Control Panel › Programs and Features › Turn Windows features on or off: untick Virtual Machine Platform and Hyper-V.
  2. Open Command Prompt as administrator, run the command below and restart.
  3. Still failing on Windows 11? Open a support ticket and we will walk you through the advanced fix.
bcdedit /set hypervisorlaunchtype off
14Error: Either virtual or RAID disk is present
  1. If you use another spoofer, turn it off or remove it.
  2. In the BIOS, set SATA Mode / RAID to AHCI (or Disabled), then save with F10.
  3. After turning RAID off, install a clean copy of Windows to avoid disk driver problems.
15Error: Unsupported firmware (MBR / Legacy)

The system disk must be GPT and the PC must start in UEFI mode. Back up important files first.

  1. Open Command Prompt as administrator and check the disk with the first command.
  2. If the check passes, convert it with the second command (change 0 if your system disk has another number).
  3. Restart, open the BIOS, change Boot Mode from Legacy to UEFI, save with F10.
mbr2gpt /validate /disk:0 /allowFullOS
mbr2gpt /convert /disk:0 /allowFullOS
16Error: CRD failed at … / Failed to init render

Desktop PC: the graphics card is too old for the overlay; only a newer card fixes it. Laptop: disable the integrated graphics (Integrated / Onboard GPU) in the BIOS so the loader uses the dedicated card.

17Error: Incorrect HWID

Windows cannot read your hardware IDs. Run both commands in Command Prompt (administrator). If either fails, Windows files are damaged and a clean Windows install is the fix.

wmic diskdrive get Caption, SerialNumber
wmic baseboard get SerialNumber
18Error: Make sure all antiviruses are disabled
  1. Uninstall every third-party antivirus.
  2. Turn off real-time protection and Windows Defender (steps 2 and 3 of “Prepare your PC”).
  3. Turn off SmartScreen: Windows Security › App & browser control › Reputation-based protection, turn off every switch.
  4. Restart and try again. Still failing on Windows 11? Open a support ticket.
19The menu shows but you cannot click it
  1. Start Steam normally, not as administrator.
  2. EA App games: turn off the EA App overlay in its settings.
  3. Turn off every other overlay and keep only the one your product uses.
  4. Run the overlay program as administrator.
20The menu disappears, or the visuals do not work
  1. If the game was just updated, wait for the product update (see Status).
  2. Verify the game files, or better, reinstall the game.
  3. Still failing: open a support ticket.
21Error: Please disable Secure Boot in the BIOS

Turn Secure Boot off in the BIOS. The exact steps for your motherboard or laptop are in step 5 of “Prepare your PC”.

22Error: Secure boot keys are incorrect and need to be enrolled
  1. Open the BIOS, turn Secure Boot on, save and start Windows.
  2. Open PowerShell and run the command below. It must answer True.
  3. Restart, open the BIOS and turn Secure Boot off again.
Confirm-SecureBootUEFI

System requirements

WindowsWindows 10 and 11 (versions 1909 to 25H2)
CPUIntel, AMD
VirtualizationSVM (AMD) or VT-x (Intel) enabled in the BIOS
RAM12 GB minimum, 16 GB recommended
Hyper-VDisabled on AMD · Enabled on Intel
Boot modeUEFI only (Intel)
Disk formatGPT only (Intel)
Secure BootDisabled
GPUAll
Window modeBorderless, Windowed
ClientAny platform
LauncherSteam, Epic Games, Xbox
SpooferNot included
USB flash driveNot required

Questions & answers

When does my key’s time start?

When the key is first activated in the loader, unless the product page says otherwise.

I changed my PC or a part. What now?

Your key is locked to one PC. Open a support ticket and ask for a reset.

The product shows “Updating”. What does it mean?

The game or its protection was updated and the product is being updated too. Wait until it shows “Available” again; the status page updates by itself.

Can I use one key on two PCs?

No. A key works on one PC and in one session at a time.

How long does delivery take?

Your key is sent in your Discord ticket as soon as the payment is checked.

Can I get a refund?

Please read our Refund Policy. Most problems are solved by support, so open a ticket first.

Features

Aimbot

General
Settings
KeybindMouse 4
Max distance
TargetChoose
FOV Size
Smoothness

A preview of the in-game menu. Click the categories to see every option.

Plans and prices on the product page
Still stuck after trying the fixes?Open a support ticket on Discord, tell us the exact error and what you already tried, and our team will help you.
Open a support ticket